The Frequency Converter is a online tool for converting frequency. It converts the inputted frequency to the desired output. Frequency is an important concept in physics and engineering. In physics, frequency is the number of times a wave repeats itself over time. In engineering, frequency is used to describe the number of times an alternating current changes direction per second. The Frequency Converter can be used to convert between these two measures of frequency. Simply enter the inputted frequency and desired output, and the Frequency Converter will do the rest.
A frequency converter is an electronic device that converts alternating current (AC) of one frequency to alternating current of another frequency. The input and output can be either direct current (DC) or single-phase AC, but most are three-phase AC. Frequency converters are also known as power inverters, AC drives, or motor drives.
Applications for frequency converters include adjustable speed drives for electric motors, renewable energy systems such as solar and windpower that use DC-to-AC conversion, uninterruptible power supplies, and aircraft electrical systems.
Frequency converters can be used to control the speed of an electric motor by varying the frequency of the AC power supply. The motor speed can be changed smoothly, without the steps associated with a mechanical gearbox. This is useful in applications where the load on the motor, and hence its speed, varies frequently, such as fans, pumps, and conveyors.
Frequency converters can also be used to operate AC motors at speeds below the nominal frequency. This is known as slip-frequency operation and can be useful in some industrial processes. For example, operating a 50 Hz motor at 40 Hz will increase the torque it produces by approximately 30%.
The output of a frequency converter can be either single-phase or three-phase. Three-phase systems are more common because they provide better power distribution and are more efficient than single-phase systems.
Frequency converters are available in a wide range of sizes, from small units that can be used to power a single electric motor, to large units that can power an entire factory. The size of the unit will be determined by the power rating of the motors that it will be used to control.
The efficiency of a frequency converter is typically between 90% and 95%. This means that for every 100 watts of input power, between 90 and 95 watts will be converted to output power.
Frequency converters are classified according to their input and output voltages and frequencies. For example, a “480V 60Hz to 208V 60Hz” converter would be suitable for use in North America, where the standard line voltage is 480 volts